CDMA

US PCS 1900 RF repeater is an analog RF repeater, which improves the PCS network.

US PCS 1900 RF repeater’s goals are: - To receives RF signal from BTS and transmits it to the blanked and shadowed area - To provide and improve voice and image data services from BTS - To support functions corresponding to BTS’s

US PCS 1900 RF repeater communicates with BTS wirelessly, thus saving additional costs for maintenance.

iDEN

iDEN repeaters are located in blanket / shadow area inside of buildings to transmit iDEN800MHz, iDEN900MHz BTS signal simultaneously.

There are three types of RF Repeaters for iDEN Band: 15dBm output power with 65dB Gain, 25dBm output power with 65dB Gain, and 30dBm output power with 80dB Gain.

iDEN 15dBm RF Repeater decreases blanked and shadowed areas and extends cell coverage by re-transmitting signal. The signal is received from BTS via Antenna directly, thus excluding additional expenses for signal transmission (such as cabling).

Tri-Band

Tri-Band In-Building Repeater is located in blanket / shadow area of insider of building to transmit Sprint/Nextel CDMA (PCS), iDEN800MHz, and iDEN900MHz BTS signals simultaneously.

Characteristics (CDMA) CDMA (PCS) Band: 80dB Gain with +24dBm maximum output power iDEN Band: 65dB Gain with +25dB maximum output power.

Bandwidth: Entire 1900MHz CDMA (PCS) frequency A Block to G Block (65MHz). Bandwidth selection functions dependant on user’s situation.

Dualband Repeater

• Field adjustable band selection
• Cellular up to 2 Bands B thru B'
• Continuous, Non-Continuous Bands Selection
• Selectable 2.5M(B'),5M(Lower B or Upper B), 10M(B), 14M(B+B')
• PCS up to 3 Bands D thru C3
• Continuous, Non-Continuous Bands Selection
• Selectable 5M, 10M, 15M, 20MHz Bandwidths
• Automatic setup and operational gain control for easy installation and maintenance free operation
• Internal Modem is installed, remote monitor and control is possible
• Low power consumption, powered from any 110AC outlet
• Remote monitoring
• Applications (Max.2.4 Acre coverage)
• Small stores and businesses
• Manufacturing facilities
• Warehouses

Inbuilding Dualband Repeater

• Field adjustable band selection (Digital Filter)
• Cellular and PCS Dual band Service
• Cellular: A1+A2, B1+B2, A+B Band and LTE Frequency block support
• PCS: 3 Non-contiguous Blocks (5, 10, 15MHz)
• Automatic setup and operational gain control
• Easy installation and maintenance free operation
• Small lightweight, mounts virtually anywhere
• Low power consumption, powered from any 100~125VAC outlet
• Remote monitoring option
• Applications - 25,000 sq ft coverage
• Small stores and businesses
• Manufacturing facilities
• Warehouses